Advanced GD&T (Virtual Classroom)

(1 customer review)

$1,300.00

Half-day sessions:

  • December 9-13 (Afternoons each day, 2-6pm, Eastern)

Full-day sessions (attend every Monday):

  • April 28, May 5, & May 12

2.4 CEU’s

Course Description

This three-day GD&T course is a comprehensive GD&T course focused on practical application. This is a live, remote course using Zoom software. Internet access and computer (recommended) or tablet required.

Zoom meeting information provided upon purchase. You must register for the meeting before the first day of class. A downloadable text will be provided during the first session of the class.

Detailed Course Description (PDF Format)

Objectives:

  1. Review the basic concepts and introduce the more complex concepts of the Y14.5 standard
  2. Provide Participants with the knowledge of proper Datum Feature selection and specification.
  3. Enable participants to properly interpret and apply each of the Y14.5 controls and rules.
  4. Enable participants to calculate functional tolerances for position and other tolerances.
  5. Continue preparing the participants for the ASME GDTP certification exams.

** Coupon code for groups of 3 or more: grp#3dayvc **

SKU: N/A Categories: , , ,

Description

Reasons for Attending

Your drawings have GD&T on them! If you have been through the GD&T Basic Level, and you need more knowledge and skill to increase your effectiveness, this course is for you. This program is a continuation of your education in the Y14.5 standard. In this program, we focus on the application and interpretation of GD&T – another step closer to becoming a GD&T expert.

Program Outline

The program begins with a review of GD&T, then continues with practical team exercises designed to enhance knowledge, build confidence, and nurture a team environment. This class is a minimum lecture, maximum experience and participation format. The subject matter covered is (as a minimum):

  • Introduction – Objectives, review Basic GD&T.
  • General rules of dimensioning and drafting review.
  • Review of the more complex controls – composite position, projected tolerance zone, etc.
  • Datum Reference Frames – proper selection and utilization exercises.
  • Calculating tolerances for maximum producibility and 100% interchangeability.
  • Functional gauge design – “Soft” or “Paper” as well as tooled gauges

Who Should Attend

This program is designed for anyone who is currently familiar and proficient with the concepts and practices of GD&T. Particular emphasis is placed on those who are responsible for specifying, and interpreting, technical documentation. Individuals desiring to become a certified Geometric Dimensioning and Tolerancing Professional (GDTP) by passing the ASME GDTP exam will need this course.

Prerequisites: Basic GD&T, or equivalent experience.

At AGI we are particularly concerned that the individuals that we teach actually retain that which we and their companies have worked so hard to present. This concern is precisely why we offer, for each participant of any AGI seminar, access to a senior consultant (usually the instructor of the course) who will be available to answer any follow on questions after the course via telephone or fax.

Additional information

Location Webinar
Course Date February 8-10, 2021, April 20-22, 2021, May 25-27, 2021, June 14-16, 2021, July 20-22, 2021, August 24-26, 2021, September 20-22, 2021, October 19-21, 2021, March 21-23, 2022, NEW FORMAT--3 Consecutive Tuesdays--July 19, July 26, & August 2, 2022, October 2022 (Exact dates TBD) Contact ljfoster@GDandT.com, Nov 7-9, 2022, Attend all 3 days, one day per week: Mon., Jan. 30; Mon., Feb. 6; & Mon., Feb. 13, Attend each Monday for 3 weeks: July 17, July 24, & July 31, Attend each AFTERNOON, Mon-Fri, Dec 4-8, Attend each Monday for 3 weeks: April 8, 15, & 22, 2024, Attend each MORNING, Mon-Fri, July 29-August 2, Attend each AFTERNOON, Mon-Fri, Dec 9-13, Attend all Mondays April 28, May 5, & May 12

1 review for Advanced GD&T (Virtual Classroom)

  1. Wes Carney

    Excellent job once again! I had a very positive experience taking this class from home. Lots of great material that will help me with my day-to-day work. Jaime did an awesome job of presenting the material, even with the limited resources he had.

Add a review

Your email address will not be published. Required fields are marked *

You may also like…

  • Placeholder

    Online Advanced GD&T ASME Y14.5 2009

    $345.00 View product
  • Placeholder

    GD&T for Inspectors/CMM Programmers

    $1,495.00 View product This product has multiple variants. The options may be chosen on the product page
  • Placeholder

    Tolerance Stack-Up Analysis

    $1,095.00 View product This product has multiple variants. The options may be chosen on the product page