Fundamentals of GD&T (Virtual Classroom)

$1,300.00

Our Most Popular Course!

Half-day sessions:

  • 2024:  December 9-13 (Mornings each day, 9am-1pm, Eastern)

Full-day sessions (attend all 3 dates):

  • 2025: March 31, April 7, & April 14

Course Description

This course is an introduction to the ASME Y14.5 standard presented as a live, remote course using Zoom software. Internet access and computer (recommended) or tablet required.

Zoom meeting information provided upon purchase. You must register for the meeting before the first day of class. A downloadable text will be provided.

Detailed Course Description (PDF Format)

Objectives

  1. Introduce the concepts and some of the language of the Y14.5 standard.
  2. Enable participants to understand each of the Y14.5 standard’s symbols.
  3. Bring participants to a fundamental understanding of Datum Reference Frames.
  4. Understand the definitions and the effects of Material Condition Modifiers.
  5. Begin to prepare the participants for the ASME GDTP certification exams.

** Coupon code for groups of 3 or more: grp#3dayvc **

SKU: N/A Categories: , , ,

Description

Benefits

Your drawings have GD&T on them (or maybe they are supposed to)! If you have been attempting to work with GD&T, and you lack the confidence to specify or are having trouble interpreting the specifications, this course is for you. Using GD&T improperly can be worse than not using it at all! This program is a complete introduction to the Y14.5 standard. In this program we will focus on the “what, when, why and how” of GD&T. The main goal is to bring all participants to a common, basic and operational level of understanding. The course is a thorough introduction to those with a little to a moderate level of experience with GD&T, but you will not be an expert. Complete GD&T training requires more than just a few days.

Program Outline

The program begins with a bit of the history of GD&T, then we look at the cost of designing and manufacturing a part. We will compare the “old” methods of dimensioning and Tolerancing to the Y14.5 approach. In this analysis, we will demonstrate the strengths and advantages of GD&T as a design tool, as a manufacturing aid, as a purchasing (estimator) aid, and as an overall communications facilitating tool. We incorporate many practical exercises to enhance learning, and to increase confidence. The subject matter covered is (as a minimum):

  • Introduction – Objectives, review of the “old” system versus GD&T
  • General rules of dimensioning and drafting per the standard.
  • Tolerance Zones – definition, concepts, comparison to existing systems.
  • GD&T symbology and definitions of controls – particular emphasis on position tolerancing
  • “Bonus” Tolerance – definition and how to take advantage of them
  • Datum Reference Frames – definition and proper construction and selection

Who Should Attend

This program is designed for anyone who designs, drafts, engineers, purchases, manufactures, estimates, or inspects parts and assemblies. Particular emphasis is placed on those who design and manufacture, and those responsible for quality.

Prerequisites

A working understanding of technical drawings (perspectives, sections, details, etc.). GD&T Overview and Print Reading suggested.

Continuing Service

At AGI we are particularly concerned that the individuals that we teach actually retain that which their companies and we have worked so hard to present. This concern is precisely why we offer, for each participant of any AGI seminar, access to a senior consultant (usually the instructor of the course) who will be available to answer any follow up questions after the course via telephone or email.

Additional information

Location Webinar
Course Dates March 23-25, 2021, May 11-13, 2021, June 9-11, 2021, July 13-15, 2021, August 17-19, 2021, September 15-17, 2021, October 12-14, 2021, November 16-18, 2021, March 16-18, 2022, NEW FORMAT--3 Consecutive Mondays--July 18, July 25, & August 1, 2022, October 2022 (Exact dates TBD) Contact ljfoster@GDandT.com, October 10-12, 2022, Attend all 3 days, one day per week: Mon., Jan. 9; Tue., Jan. 17; & dMon., Jan. 23, Attend each Monday for 3 weeks: June 5, June 12, & June 19, Attend each MORNING, Mon-Fri, Dec 4-8, Attend each AFTERNOON, Mon-Fri, Dec 4-8, Attend each Monday for 3 weeks: Feb. 26, Mar 4,, & Mar 11, 2024, Attend each AFTERNOON, Mon-Fri, July 29-August 2, Attend each MORNING, Mon-Fri, Dec 9-13, Attend each Monday for 3 weeks: March 31, April 7, & April 14, 2025

Reviews

There are no reviews yet.

Be the first to review “Fundamentals of GD&T (Virtual Classroom)”

Your email address will not be published. Required fields are marked *

You may also like…

  • Placeholder

    Online Fundamentals of GPS (ISO)

    $295.00 View product
  • Placeholder

    Fundamentals of GD&T

    $1,495.00 View product This product has multiple variants. The options may be chosen on the product page
  • Placeholder

    Online Fundamentals of GD&T ASME Y14.5 2009

    $295.00 View product
  • Placeholder

    Advanced GD&T

    $1,495.00 View product This product has multiple variants. The options may be chosen on the product page